This Canon printer test page works across PIXMA inkjets, MegaTank refillable-ink models and imageCLASS mono and color laser all-in-ones. It runs as a plain web page rather than a Canon-specific app, so this Canon printer test page prints the same way from the Canon PRINT app, Windows, macOS or Chromebook — just click print.
Why Canon owners should run a test page regularly
Most Canon PIXMA inkjets use a two-part cartridge system — a black PG-series pigment cartridge for text plus a CL-series or individual CLI-series color cartridge or cartridges for photos and graphics. Because the black and color ink sit in physically separate cartridges, one can run dry while the other still shows plenty of ink, which is exactly the kind of problem a Canon printer test page catches immediately by isolating each channel on its own block. MegaTank models swap cartridges for refillable ink tanks, which are more economical but can trap air bubbles right after a refill, and imageCLASS laser printers depend on toner and drum condition rather than liquid ink at all.
Canon IJ Printer Utility and built-in checks
Canon's own driver software includes a Nozzle Check and Print Head Alignment utility, usually accessible from the Canon IJ Printer Utility or Canon PRINT app under Maintenance. Use it alongside this Canon printer test page: print this page first for a full picture of color, gradient and alignment quality, then run Canon's Nozzle Check or Cleaning routine if any lines or crosshairs look wrong, and reprint the test page to confirm.
Reading your Canon printer test page results
| Symptom | Likely cause | Fix |
|---|---|---|
| Black text is faint but colors look fine (PIXMA) | Low or clogged PG-series black cartridge | Check the black cartridge specifically and run a black-only cleaning cycle |
| Colors are faint but black text looks fine | Low or clogged CL/CLI-series color cartridge | Run a color cleaning cycle from the Canon IJ Printer Utility |
| Streaky output right after refilling a MegaTank | Air trapped in the ink line after refilling | Run one or two cleaning cycles to purge the line, then reprint the test page |
| imageCLASS output looks patchy or faded | Low toner or an aging drum unit | Shake or replace the toner cartridge; replace the drum if streaks continue |
| Alignment crosshairs look offset | Printhead alignment drift | Run Print Head Alignment from the Canon IJ Printer Utility |
PIXMA, MegaTank and imageCLASS — what to expect
- PIXMA: two-cartridge or multi-cartridge inkjets — use the color Canon printer test page to spot which single cartridge, black or color, needs replacing.
- MegaTank: refillable ink tanks — run this test page right after a refill to check for trapped air before a big print job.
- imageCLASS: laser all-in-ones — use the black and white test page and watch the grayscale gradient for banding, which points to toner or drum wear.
Tips for accurate results on Canon printers
- Keep the Canon PRINT app or IJ Printer Utility updated — Canon periodically ships color and alignment fixes through driver updates.
- Run this Canon printer test page immediately after installing a new PG or CL cartridge to confirm it primed correctly.
- Use plain white paper and Normal or High quality settings, not Draft, when judging ink health.
- For MegaTank models, avoid overfilling tanks past the max line — it can affect how evenly ink feeds to the print head.